FRONT INTERNAL GEAR ONE-WAY CLUTCH NO.1 COMPONENT DISASSEMBLY/ASSEMBLYSM1759132
FRONT INTERNAL GEAR ONE-WAY CLUTCH NO.1 COMPONENT DISASSEMBLY/ASSEMBLY

D6E051719500A03

1.Perform the preinspection before disassembly.

(See Front Internal Gear and One-Way Clutch No.1 Component.)

2.Disassemble in the order indicated in the table.

3.Assemble in the reverse order of disassembly.
B3E0517A119

1
One-way clutch retainer
(See One-Way Clutch Retainer Disassembly Note.)
2
Side race
3
One-way clutch No.1
4
Snap ring
5
Front internal gear


One-Way Clutch Retainer Disassembly Note

• Remove the one-way clutch retainer using a flathead screwdriver, etc. as shown in the figure.
B3E0517A1202

Assembly Procedure

1.Install the snap ring.

2.Install the one-way clutch No.1 to the front internal gear in the direction of the arrow (on the one-way clutch) as shown in the figure.
D6E517ZA50383

3.Install the side race.

4.Install the one-way clutch retainer.