ON-BOARD DIAGNOSTIC SYSTEM EXTERNAL DIAGNOSTIC UNIT COMMUNICATION FUNCTION [L3 Turbo]SM1934247
ON-BOARD DIAGNOSTIC SYSTEM EXTERNAL DIAGNOSTIC UNIT COMMUNICATION FUNCTION [L3 Turbo]

id0102b7141800


Outline

• Function for allowing both the PCM and external tester to receive and send data.
• The DLC-2 has been adopted as the communication medium.
acxwzn00000328

Function

• The types of data which the PCM and external tester can receive and send using the external tester communication function include the following items.
― Recording of engine control system information in the PCM.
― Data related to exhaust emission such as input/output signals, PCM-calculated values, and system status.

DLC-2 Outline

• The DLC-2 located in the driver compartment is a service connector defined by EOBD regulations.
• The following are functions for each terminal.
am3zzn00001903

Terminal

Function
B+
Battery positive voltage
CAN-L (HS)
CAN communication line Lo (HS)
CAN-H (HS)
CAN communication line Hi (HS)
CAN-L (MS)
CAN communication line Lo (MS)
CAN-H (MS)
CAN communication line Hi (MS)
GND1
Ground (chassis)
GND2
Ground (signal)