• On-board diagnosis is performed using the flow pre-set in the PCM, and according to the test execute command sent to the PCM from the external tester.
• If a malfunction is detected as a result of the on-board diagnosis, a DTC is recorded in the PCM.
• Refer to the self test table for DTCs corresponding to the self test function.
KOEO (Key ON, Engine Off) Self test
• The KOEO self test is a powertrain control system self-diagnosis, performed when the ignition switch turn to the ON position and the engine is stopped. A KOEO self test begins when the connected M-MDS sends an execute command to the PCM.
• As the KOEO self test is performed, the PCM performs the inspection for set DTCs and if a malfunction is detected, the DTC is displayed on the M-MDS.
KOER (Key ON, Engine Running) Self test
• The KOER self test is a powertrain control system self-diagnosis, performed when the ignition switch turn to the ON position and the engine is idling. A KOER self test begins when the connected M-MDS sends an execute command to the PCM.
• As the KOER self test is performed, the PCM performs the inspection for set DTCs and if a malfunction is detected the DTC is displayed on the M-MDS.