STARTER CUT-OFF CONTROL OPERATION [MZR-CD 2.2]SM1934871
STARTER CUT-OFF CONTROL OPERATION [MZR-CD 2.2]
id0140f2172200
• The PCM stops energization of the starter relay according to an engine stop request from the immobilizer system.
When receiving engine stop request signal
― The PCM does not establish a ground to the starter circuit and the engine does not start because the starter motor does not rotate due to non- energization of the starter relay even if the ignition is switched to the start position.
When not receiving engine stop request signal
― The PCM establishes a ground to the starter circuit. Therefore, when the ignition is switched to the start position, the starter relay is energized and the starter motor rotates. As a result, the engine starts normally.