REFRIGERANT PRESSURE SENSOR CONSTRUCTION [MANUAL AIR CONDITIONER]SM1935318
REFRIGERANT PRESSURE SENSOR CONSTRUCTION [MANUAL AIR CONDITIONER]

id0740a2105000

• A capacitance type A/C pressure sensor, which converts refrigerant pressure into a linear electric signal, has been adopted.
• Consists of a pressure detecting part and signal processing part.
• The pressure detecting part is a variable capacity condenser, which changes capacitance according to the pressure.
• The signal processing part detects the capacitance of pressure detecting part, converts it to voltage, then outputs it to the climate control unit.
acxuun00000963
• When pressure is abnormal, the PCM cuts the A/C relay thereby stopping the A/C compressor.
acxuun00000964

Pressure Detecting Part

• There is a clearance between the movable ceramic diaphragm and the ceramic base, and each side has an electrode.
• When pressure is applied from the ceramic diaphragm side, the ceramic diaphragm deforms, and the clearance between the electrodes changes. As a result, capacitance is changed and pressure is detected.
am6xun00000808