AIR BAG SYSTEM OUTLINESM1935323
AIR BAG SYSTEM OUTLINE

id081000100100

• The air bag system is a device that supplements the passenger restraint function of the seat belts. The air bag system will not have the designed effect if the seat belts are not worn properly.
• The air bag system is composed of the following parts:

Item

Outline
SAS control module
• Recognizes actually equipped air bag module or pre-tensioner seat belt based on module configuration.
Crash zone sensor
• Detects degree of impact, converts to an electrical signal, and sends the signal to the SAS control module. For operation, refer to SAS control module, Air bag module and pre-tensioner seat belt deployment operation. (See SAS CONTROL MODULE CONSTRUCTION/OPERATION)
Side air bag sensor
Driver-side air bag module
• Adopted to improve safety in lateral collisions.
Passenger-side air bag module
Side air bag module
• Chest-protection type side air bag module is used in accordance with the adoption of the curtain air bag module.
Curtain air bag module
• Adopted to improve safety in lateral collisions.
Pre-tensioner seat belt
• Ball-type pre-tensioner seat belt has been adopted.
Air bag system warning light
• If the SRS air bag system operates normally, the air bag system warning light illuminates for approx. 6 s and then turns off when the ignition switch is turned to the ON position. If a malfunction is detected in the SRS air bag system, the air bag system warning light flashes (DTC output) or illuminates to alert the driver.