LIGHTING SYSTEM PERSONALIZATION FEATURESSM1935476
LIGHTING SYSTEM PERSONALIZATION FEATURES

id091800106300

• A personalization features that switches the activation/deactivation of each function has been adopted.
• Adjustments and settings for the system functions can be done as follows.
• Mazda Modular Diagnostic System (M-MDS) is required to perform the setting. Refer to the Workshop Manual for the detailed setting procedure.

Auto light system personalization features

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit
Autolamp On Setting
The auto light system sensitivity can be adjusted.
Standard (Other)
Standard (Other) / Low (Other)
Auto light/wiper control module


Room light control system personalization features

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit
Room lamp timer (when Doors closed)
The elapsed time between the doors closing and the interior light turning off can be adjusted.
15s
7.5s, 15s, 30s, 60s
BCM
Room lamp timer (when Doors unlocked)
The elapsed time between the doors unlocking and the interior light turning off can be adjusted.
30s
7.5s, 15s, 30s, 60s
BCM
Auto room lamp (when IG-Off)
The automatic illumination function of the interior light after the ignition is switched off can be canceled.
Enabled
Disabled / Enabled
BCM
Room Lamp Battery Saver Timer
The elapsed time for the interior light to automatically turn off when a door is ajar can be adjusted.
30min
60min / 30min/ 10min
BCM
Room Lamp Battery Saver
The automatic illumination function of the interior light to automatically turn off can be canceled.
Enabled
Disabled / Enabled
BCM


Turn light system personalization features

European (L.H.D. U.K.) specs.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit
Smart turn
The turn light system Function can be set.
Enabled
Disabled / Enabled
BCM

Except European (L.H.D. U.K.) specs.

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit
Smart turn
The turn light system Function can be set.
Disabled
Disabled / Enabled
BCM