TURN LIGHT SYSTEM OPERATIONSM1935478
TURN LIGHT SYSTEM OPERATION

id091800107400

• The turn light operation is controlled by the BCM.
• When a turn switch on signal is input, the BCM flashes the front, rear, and side turn lights.
• By only operating the turn switch halfway and releasing, the BCM flashes the front, rear, and side turn lights twice automatically.
Note
• This function can be optionally turned on or off using the Mazda Modular Diagnostic System (M-MDS). The initial setting is on.

Turn Light Operation

1.When the ignition is switched ON and a turn switch on signal is input to the BCM, the BCM flashes the turn lights once.

2.When a turn switch off signal is input to the BCM before the turn lights flash a second time, the BCM flashes the turn lights two more times automatically.
am6xun00000694

3.When a turn switch on signal is input to the BCM while the turn lights are flashing twice automatically, the automatic flash function ends.
am6xun00000647