MULTI INFORMATION DISPLAY CONSTRUCTION/OPERATIONSM1935591
MULTI INFORMATION DISPLAY CONSTRUCTION/OPERATION
id092200185900
Display Function
Audio system display
• Information related to the audio system such as sound volume and radio frequency are displayed in display 2 based on signals from the audio unit.
acxuun00001001
• Track and song name are displayed in display 1 when listening to CDs.
acxwzn00000431
Car-navigation system display
• Navigation information is displayed in display 1 while the vehicle is in transit. For details regarding the car- navigation system, refer to CAR-NAVIGATION SYSTEM.
Rear view monitor display
• Rear view monitor information is displayed in display 1 while the vehicle is in transit. For details regarding the rear view monitor, refer to REAR VIEW MONITOR.
Air conditioner system display
• Information related to the air conditioning system such as airflow volume, temperature setting, and mode are displayed in display 2 based on signals from the climate control system.
acxuun00001003
Drive information display
• The warning indicator has the following functions:
― Average fuel economy
― Average vehicle speed
― Instant update fuel economy
― Remaining possible travel distance
acxwzn00000432
Warning indicator display
• The following warning indicators are displayed in conjunction with the vehicle conditions.
― DOOR OPEN
― ICY ROAD CONDITIONS
― CHECK TIRE PRESSURE
― RELEASE PARKING BRAKE
― ADBLUE LEVEL LOW CONTACT YOUR DEALER
― ADBLUE LEVEL LOW CONTACT DEALER NOW
― IGNITION BLOCKED ADBLUE EMPTY
― SCR MALFUNCTION CONTACT DEALER NOW
― IGNITION BLOCKED SCR MALFUNCTION
Maintenance monitor display
• Prior or post notifications are displayed when vehicle tire rotation and periodic maintenance periods have been set.
• When the multi information display notification setting is turned on, the following notifications are displayed.
• If there are notification displays, each is displayed for
5 s after the ignition is switched ON.
• Pressing the ENTER switch on steering wheel during a notification display will cancel it.
DISPLAY ITEM
DISPLAY CONTENT
NOTIFICATION DISPLAY TYPE
DISPLAY CONDITION
Tire rotation
Remaining distance
Prior notification
Displays if the remaining distance corresponding to the set value is 500—0 km {300—0 mile}
Periodic inspection
Remaining distance
Prior notification
Displays if the remaining distance corresponding to the set value is 500—0 km {300—0 mile}
Post notification
Displays if the traveled distance corresponding to the set value surpasses 0—500 km {0—300 mile}
Remaining days
Prior notification
Displays if the remaining days corresponding to the set value are 15—0 days prior to schedule
Post notification
Displays if the number of days corresponding to the set value is 0—15 days post schedule
• If several notification displays occur, they are displayed in order of precedence.
ORDER OR PRECEDENCE
DISPLAY CONTENT
1
Periodic inspection prior notification
2
Periodic inspection post notification
3
Tire rotation prior notification
Note
• If both prior and post notifications are established simultaneously, only the post notification is displayed.
SCR system display
• The remaining amount of urea and the remaining distance to empty indications are displayed when the ignition is switched ON.
• The SCR system provides the following notification as the urea supply begins to run out.
Remaining distance to empty
SCR warning light
SCR warning alarm
AdBlue® gauge
Multi information display
2,400 km {1,500 mile} or less
Flashes at engine start
At engine start
1,500 km {940 mile} or less
Flashes at engine start than, illuminates constantly
At engine start
830 km {520 mile} or less
Flashes constantly
At engine start
0 km {0 mile} or less
Flashes constantly
—
• In addition, the following notification is provided when there is a system malfunction.
Condition
SCR warning light
SCR warning alarm
AdBlue® gauge
Multi information display
Engine starting possible
Flashes constantly (MIL illuminates also)
At engine start
Engine start not possible
Flashes constantly (MIL illuminates also)
—
Ambient temperature display
• Ambient temperature is displayed based on ambient temperature signals detected by the ambient temperature sensor.
acxwzn00000433
Clock display
• Display switching and settings are performed by operating the clock switch (audio unit).
acxuun00001006
Input/output check function
• An input/output check function has been adopted which performs signal input to the display and examines the LCD according to the microcomputer built into the multi information display.
Check code
• When the signal output part indicated in the table below is activated, the micro-computer performs self-diagnosis of the signal input to the multi information display. Also, inspection of segments and dots is possible by illuminating the entire LCD.
Check code
Signal output part
Malfunction location
01
Multi information display
CAN system communication error
02
• Audio unit
• Climate control unit
• Instrument cluster
Communication error to signal output part
04
Light switch (TNS position)
Light switch, BCM
06
Ignition switch
Ignition switch
07
Dimmer cancel switch (Instrument cluster)
• Instrument cluster
• Related wiring harness
—
LCD
—
Check code display
• The check code and inspection display are displayed in the LCD air conditioner system display areas.
