CONTROL SYSTEM OUTLINESM1935608
CONTROL SYSTEM OUTLINE

id094000103000

• A CAN (Control Area Network) system has been adopted in which multiple signals are transmitted over a single communication path as a result of wiring harness simplification.
• Twisted-pair wiring is used for connections between the following modules.
― PCM
― SCR control unit (MZR-CD 2.2)
― NOx sensor control module (MZR-CD 2.2)
― TCM (ATX)
― DSC HU/CM
― BCM
― SAS control module
― 4WD control module (with 4WD)
― Rear vehicle monitoring control module (RH) (with rear vehicle monitoring system)
― Keyless control module (with advanced keyless entry and start system)
― Instrument cluster
― Audio amplifier (with Bose ®)
― Bluetooth unit (with Bluetooth system)
― Water heater unit (with water heater system)
― Climate control unit (with full-auto air conditioner)
― Audio unit
― Multi information display
• With an on-board diagnostic function included for each multiplex module, display of DTCs using the Mazda Modular Diagnostic System (M-MDS) has improved serviceability.