JACKING POSITIONS, VEHICLE LIFT (2 SUPPORTS) AND SAFETY STAND (RIGID RACK) POSITIONSSM2444014
JACKING POSITIONS, VEHICLE LIFT (2 SUPPORTS) AND SAFETY STAND (RIGID RACK) POSITIONS
id000000800500
Jacking Positions
Warning
• Improperly jacking a vehicle is dangerous. The vehicle can slip off the jack and cause serious injury. Use only the correct front and rear jacking points and block the wheels.
• Use safety stands to support the vehicle after it has been lifted.
Front
Note
• To prevent obstruction between the jack body and front bumper when the jack body is inserted, use a low-floor type jack.
• Near the center or the front crossmember.
acxwzw00000403
Rear
2WD
• Near the center of the rear crossmember.
acxwzw00001586
4WD
• At the center of the rear differential.
acxwzw00001587
Vehicle Lift Positions, Safety Stand Positions
Warning
• Lifting a vehicle that is not stabilized is dangerous. The vehicle can slip off the lift and cause serious injury and/or vehicle damage. Make sure that the vehicle is on the lift horizontally by adjusting the height of the support at the end of the arm of the lift.
Note
• The arrow at the rear of the vehicle indicates that it is the same as the illustration for the front of the vehicle.
• Both sides of the vehicle, on side sills.
Front
acxuuw00004158
Rear
acxuuw00004159
Caution
• For vehicles with side step molding, be careful not to damage the side step molding by hitting it with auto-lift arms or a safety stand.