id0102f3801100

Note

• DTCs P0313:00 and P115A:00 cannot be cleared even if the M-MDS is used. To clear, 9L or more of fuel necessary.

• DTCs P252F:00 and P253F:00 cannot be cleared unless the engine oil data reset is performed.

1.Connect the M-MDS to the DLC-2.

acxuuw00004334

2.After the vehicle is identified, select the following items from the initial screen of the M-MDS.

PCM

• When using the IDS (laptop PC)

1. Select “Self Test”.

2. Select “Modules”.

3. Select “PCM”.

4. Select "Retrieve CMDTCs"

• When using the PDS (Pocket PC)

1. Select “Module Tests”.

2. Select “PCM”.

3. Select “Self Test”.

4. Select “Retrieve CMDTCs”.

SCR control unit

• When using the IDS (laptop PC)

1. Select “Self Test”.

2. Select “Modules”.

3. Select “SCR CU”.

4. Select "Retrieve CMDTCs"

• When using the PDS (Pocket PC)

1. Select “Module Tests”.

2. Select “SCR CU”.

3. Select “Self Test”.

4. Select “Retrieve CMDTCs”.

3.Verify the DTC according to the directions on the M-MDS screen.

4.Press the clear button on the DTC screen to clear the DTC.

5.Verify that no DTCs are displayed.