id0110b3800500

1.Remove the engine from the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].) (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [A26MX-R (L3 Turbo)].)

2.Remove the intake-air system. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

3.Remove the exhaust system. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

4.Remove the generator. (See GENERATOR REMOVAL/INSTALLATION [L3 Turbo].)

5.Remove the starter. (See STARTER REMOVAL/INSTALLATION [L3 Turbo].)

6.Remove the crankshaft position (CKP) sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [L3 Turbo].)

7.Install in the reverse order of removal.