id0112b3801800

Part Inspection

1.Verify that the battery is fully charged. (See BATTERY INSPECTION [L3 Turbo].)

2.Remove the charge air cooler duct. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

3.Disconnect the cooling fan motor connector (2 terminals).

4.Install a tester and battery to the cooling fan motor connector (2 terminals) as shown in the figure.

acxuuw00002065

5.Verify that each fan motors operate smoothly at the standard current.

• If there is any malfunction, replace the applicable part.