CANISTER VENT (CV) SOLENOID VALVE INSPECTION [L3 Turbo]SM2444811
CANISTER VENT (CV) SOLENOID VALVE INSPECTION [L3 Turbo]

id0116b4819200


Airflow Inspection

1.Remove the CV solenoid valve. (See CANISTER VENT (CV) SOLENOID VALVE REMOVAL/INSTALLATION [L3 Turbo].)

2.Inspect airflow between the ports under the following conditions.
acxuuw00003221

Measured condition

Continuity between A—B
When voltage is not applied between terminals A and B
Airflow detected
When voltage is applied between terminals A and B
No airflow

• If not specified, replace the CV solenoid valve. (See CANISTER VENT (CV) SOLENOID VALVE REMOVAL/INSTALLATION [L3 Turbo].)