 |
acxwzw00001671
id0116f2809100
1.Disconnect the negative battery cable. (See. BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2])
2.Disconnect the connector on the urea injector-side.
3.Disconnect the quick release connector on the urea injector-side. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZR-CD 2.2].)
4.Remove in the order shown in the table.
5.Install in the reverse order of removal.
acxwzw00001671
|
|
1
|
Clamp
(See
Clamp Installation Note.)
|
|
2
|
Urea injector
|
|
3
|
Gasket
(See
Gasket Installation Note.)
|
Gasket Installation Note
1.Install the gasket so that the tabs do not bend.
acxwzw00001756
|
Clamp Installation Note
1.Install the clamp so that the head of the bolt is placed downward of the vehicle.
2.Tighten the bolt.
