GENERATOR DISASSEMBLY/ASSEMBLY [L3 Turbo]SM2444861
GENERATOR DISASSEMBLY/ASSEMBLY [L3 Turbo]

id0117b2800400

Caution
• Melt the solder quickly, otherwise the diodes (rectifier) and regulator will be damaged by excessive heat.

European (L.H.D.) specs. (Except for Russia)

1.Disassemble in the order indicated in the table.

2.Assemble in the reverse order of disassembly.
acxwzw00000887

1
Rotor component
2
Stator coil component
3
Pulley
(See European (L.H.D.) specs. (Except for Russia).)
4
Rotor
5
Front bearing
6
Front cover
7
Generator heat insulator
8
Stator coil
9
Rectifier
10
Regulator component
11
Rear bracket


Pulley disassembly/assembly note

1.Disassemble/assemble the pulley using the SST.
acxwzw00000888
Tightening torque
60—85 N·m {6.1—8.7 kgf·m, 45—62 ft·lbf}


Except for European (L.H.D.) specs., Russia

1.Disassemble in the order indicated in the table.

2.Assemble in the reverse order of disassembly.
acxwzw00000889

1
Rotor component
2
Stator coil component
3
Pulley
4
Rotor
5
Front bearing
6
Front cover
7
Generator heat insulator
8
Stator coil
9
Rectifier
10
Regulator component
11
Rear bracket