 |
am5ezw00001557
id0140b6802000
1.Disconnect the negative battery cable.
2.Remove the ECT sensor. (See ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION [L3 Turbo].)
3.Place the ECT sensor in water with a thermometer, and heat the water gradually.
4.Measure the resistance between the ECT sensor terminals A and B using an ohmmeter.
am5ezw00001557
|
ECT sensor specification
| ECT (°C {°F}) |
Resistance (kilohms) |
|---|---|
|
20{68.EN_UK}
|
Approx. 37.3
|
|
80{176.EN_UK}
|
Approx. 3.84
|