id0140e3802700

Caution

• The inspection cannot be performed with this method correctly if there is a malfunction of the APP sensor or throttle valve actuator. Verify that no DTCs related to the APP sensor or throttle valve actuator are stored before the inspection.

1.Connect the M-MDS to the DLC‐2.

acxuuw00003291

2.Turn the ignition switch to the ON position.

3.Verify that the TP sensor output voltage (M-MDS PID: TP1, TP2) is within the specification. (See PCM INSPECTION [L5].)

• If not as specified, replace the throttle body. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L5].)