id0140f2444900

Note

• Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the FUEL INJECTOR CODE PROGRAM.

1.Connect the M-MDS to the DLC-2.

acxuuw00004334

2.After the vehicle is identified, select the following items from the initial screen of the M-MDS.

When using the IDS (laptop PC)

1. Select the “Module Programming”.

3.Then, select items from the screen menu in the following order.

1. Select "Programmable Parameters".

2. Select "Injector Correction Factors".

4.Retrieve DTC’s using the M-MDS, then verify if DTCs are present.

• If a DTC is present, perform the applicable DTC inspection.