id0140f2445700

Note

• Perform the following test only when directed.

Visual Inspection

1.Inspect the boost sensor for damage and cracks.

• If not as specified, replace the boost sensor.

2.Inspect vacuum hose for improper routing, kinks or leakage.

• If there is any malfunction, repair or replace suspected hose.

Sensor Output Value Inspection

1.Start the engine and warm up the engine completely.

2.Monitor the MAP PID using the M-MDS at idle. (SeePCM INSPECTION [MZR-CD 2.2] .)

― If not as specified, replace the boost sensor. (See COMMON RAIL REMOVAL/INSTALLATION [MZR-CD 2.2].)