id0140f2801300

Note

• Perform the following test only when directed.

Voltage Inspection

1.Start the engine and warm up the engine completely.

2.Measure the voltage between fuel pressure sensor terminals A and B using a voltmeter at idle.

― If not as specified, replace the common rail. (See COMMON RAIL REMOVAL/INSTALLATION [MZR-CD 2.2].)

am6zzw00004024

3.Turn off the engine and wait three minutes.

4.Switch the ignition to ON.

5.Measure the voltage between fuel pressure sensor terminals A and B using a voltmeter.

― If not as specified, replace the common rail. (See COMMON RAIL REMOVAL/INSTALLATION [MZR-CD 2.2].)