id0140f2810100

Note

• Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the MASS AIR FLOW (MAF) SENSOR DATA RESET.

1.Connect the M-MDS to the DLC-2.

acxuuw00004334

2.After the vehicle is identified, select the following items from the initial screen of the M-MDS.

1. Select the “Powertrain”.

2. Select “Data Reset”.

3.Then, select an item from the screen menu.

• MAF sensor

4.Perform the procedure according to the directions on the screen.

5.Retrieve DTC’s using the M-MDS, then verify if DTCs are present.

• If a DTC is present, perform the applicable DTC inspection.