 |
acxwzw00001407
id021300800400
1.Remove the side cover and under cover.
2.Drain the power steering fluid. (See POWER STEERING FLUID INSPECTION [L3 Turbo, L5].) (See POWER STEERING FLUID INSPECTION [MZR-CD 2.2].)
3.Disconnect the front auto leveling sensor connector. (Vehicle with front auto leveling sensor) (See FRONT AUTO LEVELING SENSOR REMOVAL/INSTALLATION.)
4.Remove the transverse member. (See TRANSVERSE MEMBER REMOVAL/INSTALLATION.)
5.Remove the front crossmember component. (See FRONT CROSSMEMBER REMOVAL/INSTALLATION [L.H.D. (L3 Turbo)].) (See FRONT CROSSMEMBER REMOVAL/INSTALLATION [L.H.D. (L5)].) (See FRONT CROSSMEMBER REMOVAL/INSTALLATION [R.H.D. (L3 Turbo, L5)].) (See FRONT CROSSMEMBER REMOVAL/INSTALLATION [MZR-CD 2.2].)
6.Remove in the order indicated in the table.
7.Install in the reverse order of removal.
acxwzw00001407
|
|
1
|
Front stabilizer component
|
|
2
|
Front stabilizer control link
|
|
3
|
Stabilizer bracket
|
|
4
|
Stabilizer bushing
|
|
5
|
Front stabilizer
|
Front Stabilizer Installation Note
1.Install the stabilizer bar so that the identification mark is on the left side of the vehicle.
acxuuw00001099
|
Stabilizer Bushing Installation Note
1.Align the outer side of the positioning plate with the stabilizer bushing.
acxuuw00001100
|
Stabilizer Bracket Installation Note
1.Install the stabilizer bracket so that the arrow is pointed to the front.
ampjjw00000547
|
