id021400800900

1.When working on the left side of the vehicle, remove the rear auto leveling sensor. (Vehicle with headlight auto leveling system) (See REAR AUTO LEVELING SENSOR REMOVAL/INSTALLATION.)

2.Remove the middle pipe. (Vehicle with L3 Turob) (See EXHAUST SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

3.Remove the TWC. (Vehicle with L5) (See EXHAUST SYSTEM REMOVAL/INSTALLATION [L5].)

4.Remove the SCR converter. (Vehicle with MZR-CD 2.2) (See EXHAUST SYSTEM REMOVAL/INSTALLATION [MZR-CD 2.2].)

5.Remove the rear stabilizer. (See REAR STABILIZER REMOVAL/INSTALLATION.)

6.Remove in the order indicated in the table.

7.Install in the reverse order of removal.

8.Inspect the rear wheel alignment. (See REAR WHEEL ALIGNMENT.)

acxuuw00001682