id031100800200

1.Remove the brake calliper component from the steering knuckle and suspend it out of the way using a cable.

2.Remove the disc plate.

3.Tap the dust cover (the part shown in the figure) with a chisel lightly and bend the processing point back to the steering knuckle side.

acxuuw00003063

4.Remove the wheel hub bolt using the SST as shown in the figure.

acxuuw00003064

5.Place a new wheel hub bolt in the wheel hub.

6.Install the wheel hub by placing a proper sized washer on the hub, and tightening the nut as shown in the figure.

acxuuw00003065