PROPELLER SHAFT INSPECTIONSM2445120
PROPELLER SHAFT INSPECTION

id031500800500

1.Measure the propeller shaft center runout using the dial gauge.
acxuuw00003097
• If it exceeds the maximum specification, replace the propeller shaft as a single component.
Propeller shaft maximum runout
0.8 mm {0.031 in}

2.Inspect the play and rotation of the joint by turning the universal joint in the directions shown by the arrows.
acxuuw00003098
• If it is not within the specification, replace the propeller shaft.
Propeller shaft rotation torque
0.29—1.47 N·m {3.0—14.9 kgf·cm, 2.6—13.0 in·lbf}