id0316d3800400

1.On level ground, jack up the vehicle and support it evenly on safety stands.

2.Drain the oil from the transfer. (See TRANSFER OIL REPLACEMENT [A26MX-R].)

3.Remove the joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION [4WD])

4.Remove the oil seals using a screwdriver.

5.Using the SST and a hammer, tap each new oil seal.

acxwzw00000465

Substitution SST

• 49 T034 201A Outer diameter: 59—64 mm {2.33—2.51 in} Inner diameter: 55 mm {2.17 in} or more Plate thickness: 2 mm {0.08 in} or more Length: 5 mm {0.20 in} or more

6.Coat the lip of each oil seal with transfer oil.

7.Install the joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION [4WD])

8.Add the specified amount and type of oil. (See TRANSFER OIL REPLACEMENT [A26MX-R].)