id0415008002a5

Installation Visual Inspection

1.Inspect the following items:

• If there is any malfunction, replace the applicable part.

(1)Excessive play of the ABS wheel-speed sensor

(2)Deformation of the ABS wheel-speed sensor

(3)Deformation or damage of the ABS sensor rotor

Clearance Inspection

1.Verify the clearance between the ABS sensor rotor and the ABS wheel-speed sensor.

• If there is any malfunction, check for improper installation, and replace if necessary.

acxwzw00000365

Sensor Output Value Inspection

1.Turn the ignition switch off.

2.Connect the M-MDS to the DLC-2.

acxwzn00000003

3.Select the following PIDs using the M-MDS:

• WSPD_LR (LR ABS wheel-speed sensor)

• WSPD_RR (RR ABS wheel-speed sensor)

4.Start the engine and drive the vehicle.

5.Verify that the display of the M-MDS shows the same value as the speedometer.

• If there is any malfunction, replace the rear ABS wheel-speed sensor.