NO.31 M RANGE POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE/M RANGE POSITION INDICATOR LIGHT ILLUMINATES IN D RANGE [FS5A-EL]

NO.31 M RANGE POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE/M RANGE POSITION INDICATOR LIGHT ILLUMINATES IN D RANGE [FS5A-EL]SM2445388

id050308932000

31	M range position indicator light does not illuminate in M range /M range position indicator light illuminates in D range
DESCRIPTION	• M range position indicator light in instrument cluster does not illuminate in M range when ignition switch is in ON position. • M range position indicator light illuminates in D range when ignition switch is in ON position.
POSSIBLE CAUSE	• M range switch (built-in selector lever component) malfunction • Steering shift switch or related circuit malfunction (with steering shift switch) • Open or short circuit in wiring harness between manual switch (built-in selector lever component) and TCM • Open or short circuit in wiring harness between steering shift switch and TCM

Diagnostic procedure

STEP	INSPECTION		ACTION
1	Inspect the MNL SW PID value using the M-MDS. (See ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR INSPECTION [FS5A-EL].) Monitor the MLN SW PID with move the selector lever to all position and range. Is the PID value normal?	Yes	• Verify that the M range position indicator light using M-MDS simulation function WL+IL. (See ACTIVE COMMAND MODES INSPECTION [INSTRUMENT CLUSTER].) • Replace the instrument cluster if necessary. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
1		No	Inspect the M range switch. (See SELECTOR LEVER COMPONENT INSPECTION.) If the M range switch is normal: • Inspect the wiring harness between selector lever component terminal C and TCM terminal 2B. • Repair or replace the any malfunctioning parts according to the inspection results.
2	• Verify the test results. ― If normal, return to the diagnostic index to service any additional symptoms. ― If the malfunction remains, inspect the related Service Information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting is completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM. (See TCM REMOVAL/INSTALLATION [FS5A-EL].)