id050310800300
| STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
• Measure the battery voltage.
• Is the battery voltage
10.0—14.0 V?
|
Yes
|
Go to the next step.
|
|
No
|
Replace or recharge the battery.
|
||
|
2
|
• Inspect the TCM related harnesses, connectors and fuses.
• Are they normal?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace any malfunctioning parts according to the inspection result.
|
||
|
3
|
• Warm up the engine to normal operating temperature.
• Retrieve DTC using the M-MDS.
• Is there any DTC present?
|
Yes
|
Record Freeze Frame Data and perform appropriate DTC troubleshooting procedures.
|
|
No
|
Go to the next step.
|
||
|
4
|
• Perform the road test. (See
ROAD TEST [AW6A-EL, AW6AX-EL].)
• Is the ATX operating normally?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace any malfunctioning parts according to the inspection result.
|
||
|
5
|
• Perform the time lag test. (See
MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-EL].)
• Is the ATX operating normally?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace any malfunctioning parts according to the inspection result.
|
||
|
6
|
• Perform the stall test. (See
MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-EL].)
• Is the stall speed within the specified?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace any malfunctioning parts according to the inspection result.
|
||
|
7
|
• Perform the line pressure test. (See
MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-EL].)
• Is the line pressure within the specified?
|
Yes
|
Perform the symptom troubleshooting and follow the procedures.
|
|
No
|
Repair or replace any malfunctioning parts according to the inspection result.
|
||
|
8
|
• Inspect following part or signal related PIDs using the M-MDS.
PCM PIDs:
TCM PIDs:
• Are they normal?
|
Yes
|
Perform the symptom troubleshooting and follow the procedures.
|
|
No
|
Repair or replace any malfunctioning parts according to the inspection result.
|
||