id0510008002e8

1.Refer to CLUTCH UNIT REMOVAL/INSTALLATION to remove the clutch unit until the pilot bearing is in a condition whereby it can be inspected. (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [A26MX-R (MZR-CD 2.2)].)

2.Without removing the pilot bearing, turn the bearing while applying force in the axial direction.

• If there is any malfunction, replace the pilot bearing. (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [A26MX-R (MZR-CD 2.2)].)

am3zzw00005910

3.Install in the reverse order of removal.

4.Start the engine. And inspect and adjust the following:

• Front wheel alignment (See FRONT WHEEL ALIGNMENT.)

• Power steering fluid air bleeding (See CLUTCH FLUID AIR BLEEDING/REPLACEMENT.)

• Leakage of engine oil, engine coolant, transaxle oil.

• Runout and contact of pulley and belt.

• Verify the idle speed. (See ENGINE TUNE-UP [MZR-CD 2.2].)

• Engine-driven accessories operation.