id0510008013a5

Caution

• Fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If it is spilled, wipe it off immediately.

Note

• If clutch system-related hydraulic parts are removed, supply brake fluid, bleed air, and inspect for fluid leakage after the installation.

1.Remove the under cover.

2.Remove in the order indicated in the table.

3.Install in the reverse order of removal.

4.Bleed the air from the system. (See CLUTCH FLUID AIR BLEEDING/REPLACEMENT.)

5.After installation, inspect the clutch pedal. (See CLUTCH PEDAL INSPECTION/ADJUSTMENT [L3 Turbo].)

acxwzw00000501