BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [A26MX-R (MZR-CD 2.2)]

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [A26MX-R (MZR-CD 2.2)]SM2445464

id0515218008m6

1.Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.Disconnect the back-up light switch connector.

3.Remove the under cover.

4.Remove the back-up light switch.

acxwzw00001279

5.Install the back-up light switch (with a new gasket) to the transaxle case.

Tightening torque

28.2—52.2 N·m {2.88—5.32 kgf·m, 20.8—38.5 ft·lbf}}

6.Install the under cover.

7.Connect the back-up light switch connector.

8.Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)