TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR INSPECTION [FS5A-EL]SM2445475
TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR INSPECTION [FS5A-EL]

id051721292100

Caution
• Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

On-Vehicle Inspection

1.Disconnect the coupler component connector.

(1)Disconnect the negative battery cable.
(2)Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L5].)
(3)Disconnect the coupler component connector.
am8rrw00002340

2.Measure the resistance between the coupler component terminal A and D.
am8rrw00002341
• If there is any malfunction, replace the coupler component. (See TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION [FS5A-EL].)

TFT sensor specification

ATF temperature (°C{°F})

Resistance (kilohm)
–20 {–4}
236—324
0 {32.EN_UK}
84.3—110
20 {68.EN_UK}
33.5—42.0
40 {104.EN_UK}
14.7—17.9
60 {140.EN_UK}
7.08—8.17
80 {176.EN_UK}
3.61—4.15
100 {212.EN_UK}
1.96—2.24
120 {248.EN_UK}
1.13—1.28
130 {266.EN_UK}
0.87—0.98


Off-Vehicle Inspection

1.Place the TFT sensor and a thermometer in ATF as shown, and heat the ATF gradually.
ampjjw00005643
Warning
• A hot ATF and beaker can cause severe burns. Do not touch them.

2.Measure the resistance between the coupler component terminals E and H.
am8rrw00002341
• If there is any malfunction, replace the coupler component. (See TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION [FS5A-EL].)

TFT sensor specification

ATF temperature (°C{°F})

Resistance (kilohm)
–20 {–4}
236—324
0 {32.EN_UK}
84.3—110
20 {68.EN_UK}
33.5—42.0
40 {104.EN_UK}
14.7—17.9
60 {140.EN_UK}
7.08—8.17
80 {176.EN_UK}
3.61—4.15
100 {212.EN_UK}
1.96—2.24
120 {248.EN_UK}
1.13—1.28
130 {266.EN_UK}
0.87—0.98