id051721293200

Warning

• A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool.

Primary Control Valve Body

1.Remove the primary control valve body.

(1)Disconnect the negative battery cable.

(2)Remove the under cover.

(3)Clean the transaxle exterior throughout with a steam cleaner or cleaning solvents.

(4)Drain the ATF. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [FS5A-EL].)

(5)Remove the oil pan. (See CONTROL VALVE BODY REMOVAL/INSTALLATION [FS5A-EL].)

(6)Remove the primary control valve body. (See CONTROL VALVE BODY REMOVAL/INSTALLATION [FS5A-EL].)

2.Remove in the order indicated in the table.

am8rrw00002457

3.Install in the reverse order of removal.

4.Add ATF. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [FS5A-EL].)

5.Perform the “Mechanical System Test”. (See MECHANICAL SYSTEM TEST [FS5A-EL].)

6.Perform the “Road Test”. (See ROAD TEST [FS5A-EL].)

Secondary Control Valve Body

1.Remove the secondary control valve body.

(1)Disconnect the negative battery cable.

(2)Remove the battery.

(3)Remove the battery tray.

(4)Remove the under cover.

(5)Clean the transaxle exterior throughout with a steam cleaner or cleaning solvents.

(6)Drain the ATF. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [FS5A-EL].)

(7)Remove the oil cover. (See CONTROL VALVE BODY REMOVAL/INSTALLATION [FS5A-EL].)

(8)Remove the secondary control valve body. (See CONTROL VALVE BODY REMOVAL/INSTALLATION [FS5A-EL].)

2.Remove in the order indicated in the table.

am8rrw00002458

3.Install in the reverse order of removal.

4.Add ATF. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [FS5A-EL].)

5.Perform the “Mechanical System Test”. (See MECHANICAL SYSTEM TEST [FS5A-EL].)

6.Perform the “Road Test”. (See ROAD TEST [FS5A-EL].)