DIFFERENTIAL GEAR O-RING REPLACEMENT [AW6A-EL, AW6AX-EL]SM2445496
DIFFERENTIAL GEAR O-RING REPLACEMENT [AW6A-EL, AW6AX-EL]

id051723800200

Caution
• The O-ring is easily damaged by the sharp edges of the drive shaft splines. Do not let the splines contact the O-ring.

1.Remove the drive shaft and joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION [2WD].) (See JOINT SHAFT REMOVAL/INSTALLATION [4WD].) (See FRONT DRIVE SHAFT REMOVAL/INSTALLATION [L3 Turbo].)

Caution
• Do not damage the differential case.

2.Remove and discard the O-ring using a tape-wrapped flathead screwdriver.
acxuuw00000543
Caution
• Do not damage the O-ring.
• Do not damage the differential case.

3.Apply ATF to a new O-ring and install it to the differential case.

4.Install the drive shaft and joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION [2WD].) (See JOINT SHAFT REMOVAL/INSTALLATION [4WD].) (See FRONT DRIVE SHAFT REMOVAL/INSTALLATION [L3 Turbo].)