id051723800800

1.Remove the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

Caution

• The oil seal is easily damaged by the sharp edges of the torque converter splines. Do not let the splines contact the oil seal.

• Do not drop the torque converter.

• Do not pinch fingers.

2.Remove the torque converter. (See TORQUE CONVERTER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

Caution

• Do not to damage the bushing on the oil pump body.

3.Using a tape-wrapped flathead screwdriver, remove the oil seal from the oil pump body.

acxuuw00000605

4.Using the SST and a hammer, install the oil seal to the oil pump body.

acxuuw00000606

Substitution SST

• 49 U027 003 Outer diameter: 67 mm {2.64 in} or more Inner diameter: 54—61 mm {2.13—2.40 in} Plate thickness: 2 mm {0.08 in} or more

5.Coat the lip of the oil seal with grease.

6.Install the torque converter. (See TORQUE CONVERTER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

7.Install the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)

8.Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-EL].)