id051800800200

1.Turn the ignition switch to the ON position. (engine off)

2.Remove the clip of the selector lever base plate, then remove the interlock cable from the U-groove.

L.H.D.

acxuuw00000400

R.H.D.

acxwzw00000171

3.Remove the interlock cable from the selector lever.

4.Verify that the interlock cable moves freely with the brake pedal depressed.

acxuuw00000401

• If there is any malfunction, inspect the interlock cable for abnormal winding. If any abnormal winding found, correct it.

• If the malfunction persists after correcting the interlock cable winding, replace it.