MAGNETIC CLUTCH ADJUSTMENT [FULL-AUTO AIR CONDITIONER]SM2445679
MAGNETIC CLUTCH ADJUSTMENT [FULL-AUTO AIR CONDITIONER]

id0740a1800500


L3 Turbo, L5

1.Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.

L3 Turbo (Saudi Arabia), L5
acxuuw00002860

L3 Turbo (except Saudi Arabia)
acxuuw00001569

2.Verify that the clearance is within the specification.

• If not within the specification, remove the pressure plate and adjust the clearance by changing the shim ( 0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.
Magnetic clutch clearance
0.35—0.65 mm {0.014—0.025 in} (L3 Turbo (Saudi Arabia), L5)
0.3—0.5 mm {0.012—0.019 in} (L3 Turbo (except Saudi Arabia))
am5ezw00001255


MZR-CD 2.2

1.Set the A/C compressor on a level block.
am5ezw00001256

2.Turn on the magnetic clutch by connecting the battery positive voltage to the magnetic clutch connector and ground to the A/C compressor body.

3.Fix a dial gauge on a magnetic base and sent the measuring probe onto point A on the pressure plate surface.
am6zzw00003546

4.Turn off the magnetic clutch by disconnecting the ground from the A/C compressor body, then measure the dial gauge readings.

5.Measure the clearance for points B and C on the pressure plate surface by repeating the above Step 2 through 4.

6.Verify that the clearance.

• If not within the specification, remove the pressure plate and adjust the clearance by changing the shim ( 0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.
am5ezw00001255
Magnetic clutch clearance
0.3—0.5 mm {0.012—0.019 in}