id0740a1801200

1.Set the fan speed MAX HI.

2.Set the temperature control at MAX COLD (Turn the left).

3.Turn the A/C switch off.

4.Set the RECIRCULATE mode.

5.Close all doors and windows.

6.Wait for 5 min.

7.Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

8.Disconnect the evaporator temperature sensor connector.

9.Measure the temperature at the blower inlet.

10.Measure the resistance between terminals of the evaporator temperature sensor.

• If the resistance is not as shown in the graph, replace the evaporator temperature sensor.

acxuuw00000978