DTC TABLE [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]

DTC TABLE [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]SM2445829

id09021h800300

DTC			Detection condition	Page
Security light flashing pattern	M-MDS display^*
Security light flashing pattern	Keyless control module	PCM
11	B1681	P1260:00	No detected communication with the coil	SECURITY LIGHT: 11, DTC: B1681/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
12	B2103	P1260:00	Coil malfunction	SECURITY LIGHT: 12, DTC: B2103/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
13	B1600	P1260:00	The key ID number data cannot be read	SECURITY LIGHT: 13, DTC: B1600/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
13	B2431	P1260:00	Key ID number registration error	SECURITY LIGHT: 13, DTC: B2431/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
14	B1602	P1260:00	The keyless control module cannot read key ID number data normally	SECURITY LIGHT: 14, DTC: B1602/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
15	B1601	P1260:00	The keyless control module has detected unregistered key ID number.	SECURITY LIGHT: 15, DTC: B1601/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
16	U2510	P1260:00	Communication error between the keyless control module and the PCM (no response)	SECURITY LIGHT: 16, DTC: U2510/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
21	B1213	P1260:00	Only one key ID number is registered.	SECURITY LIGHT: 21, DTC: B1213/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
22	B2141	P1260:00	Communication error between the keyless control module and the PCM (data transfer error)	SECURITY LIGHT: 22, DTC: B2141/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
23	B2139	P1260:00	ID number data in the PCM and the keyless control module do not match.	SECURITY LIGHT: 23, DTC: B2139/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]
Not illuminated	B1342	-	Keyless control module malfunction	DTC B1342 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND START SYSTEM)]

*:The letters at the beginning of each DTC are only displayed when using the M-MDS, and refer to the following: B= Body system, P= Powertrain system, U= Network communication system.