DTC INSPECTION [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)]SM2445845
DTC INSPECTION [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)]
id0902e5800200
Security Light
1.Turn the ignition switch to the ON position.
2.Verify the security light state.
• If there is any malfunction:
― After any malfunction is detected, the security light will function as follows
for approx. 1 min.
• DTC 16 and lower: Flashes
• DTC 21 and higher: Illuminated
• If there is no malfunction:
― The security light illuminates
for approx. 3 s and goes out.
3.When any malfunction has been detected, read DTCs via flashing patterns displayed after the security light flashes or is illuminated for approx. 1 min.
• Perform troubleshooting according to the corresponding DTC inspection.
Note
• A verified DTC is flashed 10 times repeatedly by the security light.
• If multiple DTCs are verified, the security light displays only the smallest DTC.
M-MDS
1.Connect the M-MDS to the DLC-2.
acxuuw00003258
2.After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
• When using the IDS (laptop PC)
1. Select “Self Test”.
2. Select “Modules”.
3. Select “IC”.
• When using the PDS (Pocket PC)
1. Select “Module Tests”.
2. Select “IC”.
3. Select “Self Test”.
3.Verify the DTC according to the directions on the screen.
• If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
