DTC INSPECTION [INSTRUMENT CLUSTER]

DTC INSPECTION [INSTRUMENT CLUSTER]SM2445855

id0902e8960300

1.Connect the M-MDS to the DLC-2.

acxuuw00003457

2.After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

• When using the IDS (laptop PC)

1. Select “Self Test”.

2. Select “Modules”.

3. Select “IC”.

• When using the PDS (Pocket PC)

1. Select “Module Tests”.

2. Select “IC”.

3. Select “Self Test”.

3.Verify the DTC according to the directions on the screen.

• If a DTC is displayed, repair the malfunctioning location according to the corresponding DTC inspection after recording the snap shot data. (See DTC TABLE [INSTRUMENT CLUSTER].)

Snapshot data table

Note

• Snapshot data items are not displayed, according to detected DTC.

Snapshot data item	Data contents	Unit	Display content
TOTAL_DIST	Odometer reading when DTC detected	km	Odometer reading when DTC detected (four-digit number indicated)

1.After completion of repairs, clear all DTCs stored in the instrument cluster. (See CLEARING DTC [INSTRUMENT CLUSTER].)