id0902f5345400

1.Connect the M-MDS to the DLC-2.

acxuuw00003310

2.Verify the following vehicle conditions:

• All the switches are turned off (except the ignition switch).

• All the doors, bonnet, and liftgate are closed.

• All the doors, and liftgate are unlocked.

• Parking brake lever is pulled.

3.Start the engine.

Note

• If the engine is not running, the BCM determines that the oil pressure switch malfunction.

4.After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

• When using the IDS (laptop PC)

1. Select “Self Test”.

2. Select “Modules”.

3. Select “GEM”.

• When using the PDS (Pocket PC)

1. Select “Module Tests”.

2. Select “GEM”.

3. Select “Self Test”.

5.Verify the DTC according to the directions on the screen.

• If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

6.After completion of repairs, clear all DTCs stored in the BCM. (See CLEARING DTC [BCM].)