B1317

Battery voltage high

Input voltage from the battery is excessively high.

(See DTC B1317 [BCM].)

B1318

Battery voltage low

Input voltage from the battery is excessively low.

(See DTC B1318 [BCM].)

B1322

Driver door ajar circuit short to ground

Short to ground in wiring harness between BCM and front door switch (driver-side)

(See DTC B1322 [BCM].)

B1330

Passenger door ajar circuit short to ground

Short to ground in wiring harness between BCM and front door switch (passenger-side)

(See DTC B1330 [BCM].)

B1342

ECU is faulted

BCM microcomputer malfunction

(See DTC B1342 [BCM].)

B1502

Turn signal left circuit short to ground

Short to ground in wiring harness between BCM and turn switch

(See DTC B1502 [BCM].)

B1506

Turn signal right circuit short to ground

Short to ground in wiring harness between BCM and turn switch

(See DTC B1506 [BCM].)

B1520 ^*1

Bonnet latch switch circuit open

Open circuit in wiring harness between BCM and bonnet latch switch

(See DTC B1520 [BCM].)

B1566

Door ajar circuit short to ground

Short to ground in wiring harness between BCM and rear door switches

(See DTC B1566 [BCM].)

B1614

Rear wiper interval switch input circuit short to ground

Short to ground in wiring harness between BCM and rear wiper and washer switch (INT)

(See DTC B1614 [BCM].)

B1873

Hazard warning switch input circuit short to ground

Short to ground in wiring harness between BCM and hazard warning switch

(See DTC B1873 [BCM].)

B2175 ^*2

A/C request switch circuit short to ground

Short to ground in wiring harness between BCM and climate control unit (A/C ON request)

(See DTC B2175 [BCM].)

B2177 ^*1

Intruder sensor circuit failure

Intruder sensor circuit malfunction

(See DTC B2177 [BCM].)

B2218

Door lock switch circuit short to ground

Short to ground in wiring harness between BCM and door lock switches

(See DTC B2218 [BCM].)

B2477 ^*3

Module configuration failure

BCM data configuration error

(See DTC B2477 [BCM].)

B2574

Driver-side door lock-link switch circuit (lock-side) short to ground

Short to ground in wiring harness between BCM and driver-side door lock-link switch

(See DTC B2574 [BCM].)

B2665 ^*1

Theft-deterrent siren circuit failure

BCM cannot receive the theft-deterrent siren signal 5 times consecutively.

(See DTC B2665 [BCM].)

B2721

Liftgate ajar output circuit short to ground

Short to ground in wiring harness between BCM and liftgate latch switch

(See DTC B2721 [BCM].)

B2982

Parking brake switch circuit open

Open circuit in wiring harness between BCM and parking brake switch

(See DTC B2982 [BCM].)

C1189

Brake fluid level sensor input circuit short to ground

Short to ground in wiring harness between BCM and brake fluid level sensor

(See DTC C1189 [BCM].)

C1284

Oil pressure switch circuit failure

Open circuit in wiring harness between BCM and oil pressure switch

(See DTC C1284 [BCM].)

C1295

Steering angle sensor internal fault

BCM detects the steering angle sensor internal abnormality (signal overflow).

(See DTC C1295, C1307, C1441, C1442, C1443, C1444, C144A, C144C [BCM].)

C1307

Steering angle sensor encoder ring defective

BCM detects the steering angle sensor internal abnormality (signal jump).

C1441

Steering phase A circuit signal is not sensed

Open circuit in wiring harness between BCM and steering angle sensor

C1442

Steering phase B circuit signal is not sensed

Open circuit in wiring harness between BCM and steering angle sensor

C1443

Steering phase A circuit short to ground

Short to ground in wiring harness between BCM and steering angle sensor

C1444

Steering phase B circuit short to ground

Short to ground in wiring harness between BCM and steering angle sensor

C144A

Steering phase C circuit short to ground

Short to ground in wiring harness between BCM and steering angle sensor

C144C

Steering phase C circuit signal is not sensed

Open circuit in wiring harness between BCM and steering angle sensor

C1937

Steering angle sensor offset failure

BCM lost the steering angle initialization position.

(See DTC C1937 [BCM].)

U0028 ^*1

Communication error with intruder sensor

BCM cannot receive the signal from the intruder sensor normally.

(See DTC U0028 [BCM].)

U0073

CAN system communication error

BCM or twisted pair malfunction

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (L5))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (L5))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (L3 Turbo))].)

(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (L3 Turbo))].)

U0100

Communication error with PCM

BCM cannot receive the signal from PCM for 5 s or more.

U0121 ^*3

Communication error with DSC HU/CM

BCM cannot receive the signal from DSC HU/CM for 5 s or more.