id0902f6803800

Note

• The supplier can vary with the unit. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(2)Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(3)Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)

3.Verify the supplier by referring to the label attached to each unit.

acxuuw00003634

Verify Using the Diagnostic Assist Function

1.Turn the ignition switch to the ACC or ON position.

2.Turn the audio unit power to ON.

3.While pressing the POWER/VOLUME switch, simultaneously press the PRESET switch 5 for 3 s or more.

With RDS (radio data system)

acxuuw00003635

Without RDS (radio data system)

acxwzw00000786

4.Identify the supplier code by referring to the information display.

acxuuw00003636

Note

• The supplier code can also be identified from the DTC displays screen.

acxuuw00003637

5.Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.