id0902g8440500

Note

• All DTCs displayed in the DTC inspection should be entered in the Audio Repair Order Form.

Audio Unit

Using the M-MDS

1.Connect the M-MDS to the DLC-2.

acxuuw00003493

2.After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

• When using the IDS (laptop PC)

1. Select “Self Test”.

2. Select “Modules”.

3. Select “ACU”.

• When using the PDS (Pocket PC)

1. Select “Module Tests”.

2. Select “ACU”.

3. Select “Self Test”.

3.Verify the DTC according to the directions on the screen.

• If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4.After completion of repairs, clear all DTCs stored in the Bluetooth unit. (See CLEARING DTC [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)].)

Without using M-MDS (on-board diagnostic test mode)

1.Turn ignition switch to ACC or ON position.

2.While pressing the POWER/VOLUME switch, simultaneously press the RPT/PRESET switch 1 and the PRESET switch 6 for 3 s or more.

With RDS (radio data system)

acxuuw00003792

Without RDS (radio data system)

acxwzw00000824

Note

• If several DTCs are in the memory, they can be displayed using the SEEK/TRACK switch (up or down).

amxzzw00001109

3.To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.

Car-navigation Unit (Without Integrated Multi Information Display)

1.Turn ignition switch to ACC or ON position.

2.Turn the audio power to OFF.

3.While pressing the POWER/VOLUME switch, simultaneously press the DISP switch for 0.2 s or more.

acxuuw00003793

4.While pressing the detail switch.

acxuuw00003794

5.To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.