DTC B2477 [MULTI INFORMATION DISPLAY]SM2445948
DTC B2477 [MULTI INFORMATION DISPLAY]

id0902i4935800

DESCRIPTION

Multi information display configuration error
DETECTION CONDITION
• Multi information display configuration has not been performed.
POSSIBLE CAUSE
• Multi information display configuration error
• Multi information display malfunction

Diagnostic Procedure

STEP

INSPECTION

ACTION
1
PERFORM MULTI INFORMATION DISPLAY CONFIGURATION
• Perform the “MULTI INFORMATION DISPLAY CONFIGURATION” using the M-MDS. (See MULTI INFORMATION DISPLAY CONFIGURATION.)
• Clear the DTC from multi information display using the M-MDS. (See CLEARING DTC [MULTI INFORMATION DISPLAY].)
• Turn the ignition switch to the ACC position.
• Perform the “DTC INSPECTION” to confirm the multi information display DTC. (See DTC INSPECTION [MULTI INFORMATION DISPLAY].)
• Is the same DTC present?
Yes
Perform the “MULTI INFORMATION DISPLAY CONFIGURATION” again, then go to the next step.
(See MULTI INFORMATION DISPLAY CONFIGURATION.)
No
Go to Step 3.
2
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from multi information display using the M-MDS. (See CLEARING DTC [MULTI INFORMATION DISPLAY].)
• Turn the ignition switch to the ACC position.
• Perform the “DTC INSPECTION” to confirm the multi information display DTC. (See DTC INSPECTION [MULTI INFORMATION DISPLAY].)
• Is the same DTC present?
Yes
Replace the multi information display, then go to the next step.
(See MULTI INFORMATION DISPLAY REMOVAL/INSTALLATION.)
No
Go to the next step.
3
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [MULTI INFORMATION DISPLAY].)
No
DTC troubleshooting completed.