id0902i4936000
| DESCRIPTION |
Invalid data received from instrument cluster |
|---|---|
|
DETECTION CONDITION
|
• Multi information display receives invalid signal of vehicle speed data from the instrument cluster for
5 s or more, while the ignition switch is ON.
|
|
POSSIBLE CAUSE
|
• PCM DTC is stored
• Instrument cluster DTC is stored
• Multi information display malfunction
|
Diagnostic Procedure
| STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY PCM DTC
• Perform the PCM DTC inspection using the M-MDS. (See
ON-BOARD DIAGNOSTIC TEST [L5].) (See
ON-BOARD DIAGNOSTIC TEST [L3 Turbo].) (See
ON-BOARD DIAGNOSTIC TEST [MZR-CD 2.2].)
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
(See
DTC TABLE [L5].)
(See
DTC TABLE [L3 Turbo].)
(See
DTC TABLE [MZR-CD 2.2].)
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY INSTRUMENT CLUSTER DTC
• Perform the “DTC INSPECTION” to confirm the instrument cluster DTC. (See
DTC INSPECTION [INSTRUMENT CLUSTER].)
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from multi information display using the M-MDS. (See
CLEARING DTC [MULTI INFORMATION DISPLAY].)
• Turn the ignition switch to the ON position.
• Perform the “DTC INSPECTION” to confirm the multi information display DTC. (See
DTC INSPECTION [MULTI INFORMATION DISPLAY].)
• Is the same DTC present?
|
Yes
|
Replace the multi information display, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||